Fire clothing is one of the important equipment to protect the personal safety of firefighters active in the first line of fire protection, it is not only an indispensable part of the fire rescue scene, but also a fireproof appliance to protect the firefighters from harm. Therefore, it is particularly important to adapt to the fire scene rescue activities.

(1) Fire protective clothing shall not be in direct contact with flames and melting materials.

(2) Before using fire protective clothing, you must carefully check whether the clothing is damaged. If there is damage, it is strictly prohibited to use.

(3) When using, it must be noted that the head cover and the mask of the mask are closely matched, and the neck buckle and the white buckle of the chest must be fastened to ensure that the neck and chest are airtight. The belt must be tightened to reduce the "bellows effect" during exercise.

(4) After each use, wash with soapy water or 0.5-1% sodium carbonate aqueous solution according to the dirt, then rinse with water, put in a cool and ventilated place, dry and pack.

(5) When folding the fire protective clothing, lay the head cover opening upward on the ground. Fold back the head cover, neck buckle and two sleeves, and then fold the garment vertically, overlapping the left and right sides, the tips of the two boots face out to one side, put the gloves in the middle, the sole of the shoe is rolled into a roll, and put it into the chemical protective clothing bag horizontally.

(6) Fire protective clothing is strictly prohibited from heat and sunlight during storage, and is not allowed to contact active chemicals and various oils.

The above content comes from the Internet, if there is infringement contact delete.